Ruger Cylinders from BRC, over two thousand single six cylinders sold and counting. Cylinders will be hot blued rimfire cylinders. Mfg out 1144 steel. All BRC products come with a 100% guarantee.
Ruger Single Shot New Model replacement cylinders offered by BRC.
- 6 Shot, 22 LR, $135 + $10 shipping
- 8 Shot, 22 LR, $200 + $10 shipping
- 6 Shot, 22 Mag, $135 + $10 shipping
- 8 Shot, 22 Mag, $200 + $10 shipping
- 6 Shot, 17 Cal. HM2, $135 + $10 shipping
- 8 Shot, 17 Cal. HM2, $200 + $10 shipping
- 8 Shot, 17 Cal. HMR, $200 + $10 shipping
* Note - Prices are subject to change without notification. Call for current prices
Call to Order: 575-535-2923
NEW ITEM! Ruger 44-40 Replacement Cylinder Drop In Ruger drop in 44-40 Cylinder ONLY FOR Ruger Vaquero 44cal. and Ruger New Model Blackhawk in 44 Special ONLY. Cylinders will be hot blued. Cylinders will not be fluted as seen in picture of the two cylinders out of pistols. Due to customer demand BRC is producing this new 44-40 cylinder for those customers who would prefer to shoot there Ruger Vaquero and New Model Blackhawk in 44-40 rather than 44 Special.
Price: $325. + shipping USPS cost.
Ruger Blackhawk Ejector Rod Housing, replacing the Factory Aluminum Parts, are made from durable, machined steel that wears longer and functions smoother than the factory aluminum part. Increased weight helps cut down muzzle flip. High-lustre blue finish adds a touch of class to your Ruger Blackhawk revolver. SPECS: Steel, high-luster blued. 4 inch (10 cm) long, 1/4 inch (6.3 mm) wide. Fits Blackhawk with 7 1/2 inch, 5 1/2 inch, and 4 5/8 inch barrels. Older guns, with silver brazed studs, use the 1/4 inch model. New guns use 200 inch model. $40.00 + shipping USPS cost. E/R Housing: 1/4 inch. E/R Housing: .200 inch.
Story Ruger Blackhawk Birdshead Ejector Rod Large, Round, Button is Easy to Hit. Dished button provides excellent finger purchase for fast, sure ejection. Patterned after the "Bullseye" style ejector used on original Colts. Fits all models of Blackhawk and Vaquero. SPECS: Steel, blue, polished finish. 4 inches (10.4 cm) long .48 inch (12 mm) dia. button. May require minor fitting. Birds Head Ejector: $40.00 + shipping USPS cost.
Ruger 10/22 Barrel Band Strong Replacement Band for An Attractive Look and Secure Fit. Rugged, machined steel bank replace factory alloy band and matches barrel finish. Machined to original dimensions, band is blued to either a gloss or matte finish to dress up and customize your rifle. Due to variations in manufacture of original firearm, some minor gunsmith fitting may be require to achieve proper fit. SPECS: Machined steel, matte or gloss blued finish. Fits Ruger 10/22 only. $40.00 + shipping USPS cost. Ruger 10/22 Barrel Band, Gloss Blue. Ruger 10/22 Barrel Band, Matte Blue.
Story Ruger Cylinders for Super Blackhawk available with removable bushing Ready to Fit and Chamber for Popular Cowboy Action and Hunting Cartridges. High quality, six-shot, cylinder makes it easy and economical to building in a custom, large frame Ruger single action revolver for cowboy shooting or big game hunting. Outside diameter, as well as the timing ratchets and locking notches are pre-cut to save time and effort. Bored undersized to .304 inches, ready for you to ream the final chamber. Oversize length allows precise fitting to the factory frame for solid lockup and superior accuracy. Cylinders are available standard or with a separate, pre-fit base pin bushing similar to 1st/2nd generation Colts. Bushing is .020 inches oversize in length to allow correct fitting of cylinder-to-frame by the gunsmith. Unfluted (UF) for maximum strength. SPECS: 4140 chrome moly steel, in the white. Six chambers borded to .304 inches (7.7 mm). I.D. for large frame, old and new style Ruger SA revolvers. Requires gunsmith fitting. .304 inch standard 5H119x95: $325.+ shipping USPS cost. Base Pine Bushing only: $120.+ shipping USPS cost.
BRC Ruger Cylinders Update
Al Story, owner of BRC, will be offering Ruger cylinders and barrels in 38-40 for Ruger pistols in the coming months. The demand for Ruger center fire cylinders has been so great there is a 3 month backlog. No new orders for center fire cylinders will be taken until September 1, 2021.
I had the opportunity to do some testing of my Ruger Vaquero with a new BRC 45 ACP cylinder. Fortunately for me Al had a number of orders for the 45 ACP cylinders. When I stopped by the shop to pick up the pistol with 45 ACP cylinder Al asked for my testing feedback.
My testing was rather simple. I set a can at 25 yards and shot 6 rounds at it. Here you will see a photo with my Ruger 41 Mag and Ruger Vaquero with 45 LC and 45 ACP cylinders along with said can and my barrel testing results. My first shot at the can seemed a bit low so I gave a little more front sight. With fixed sights I was surprised at the results. A few days later, while pumping water at the south end of our place, I placed rocks at 25 and 50 yards toward the base of a hill. The Vaquero 45 ACP held true and had no trouble finding the mark out to 100 yards without using Kentucky windage, a true test of quality Ruger barrels and BRC cylinder alignment. My 45 ACP load used was my custom 1911 load. I use my RCBS 201 KT mold for cast bullets and 7.4 gr of #5 powder bullet overall length of 1.205".
I will suggest to Al that he also offer barrels for the large frame Ruger pistols in 45 cal. with hopes of a 4 1/2" barrel for my Vaquero, much like my Ruger 41 mag. pistol pictured. As an off hand rifle competitor, I have found having quality in your rifle and pistol is a must for accuracy much like the quality one sees in BRC and Ruger products. — Ken Lewis